6.7 Distribution blocks OJL

OJL distribution blocks are used for branching conductors from one larger cross-section to several conductors with
a smaller cross-section. The blocks are offered in two versions with the nominal connecting cross-section of 70 mm²
(six outputs) and 120 mm² (eleven outputs), and they are designed for all types of Al and Cu conductors. Screws are tightened with hex key (inbus). The blocks can be attached to the DIN rail, or on the plate using fastening screws. The maximum operating temperature is 80°C. The protection degree for all types is IP 20. The distribution blocks have an easily openable top cover made of dark transparent plastic that, however, does not need to be opened for the assembly and disassembly of the output conductors. OJL distribution blocks have been tested in compliance with EN 61238-1 and EN 60947-7-1.