Multilevel terminal block EB 2,5 U2/5 D A
Manufacturer Code: A921140
4,18 € without VAT 5,06 € with VAT
Multilevel terminal block EB 2,5 U2/5 D A
Rated cross-section [mm²] | 2,5 |
Connection range [mm²] | 0,5 ÷ 4 |
Rated current [A] | 24 (The current load at the EB 2.5 U2 terminal in the case of an applied connecting ridge is max. 20 A) |
Short-time withstand current [A] | 300 |
Rated voltage Ui [V] | 1000 AC / DC |
Nominal operating voltage Ue [V] | 400 AC |
Rated impulse withstand voltage U (Imp) [kV] | 8000 |
Tightening torque [Nm] | 0,4 |
Tools | PH 0 / 0,5 x 3 |
Assembly method (on DIN rail) | TH 35 |
IP code | 20 |
Operating temperature [°C] | -40 ÷ +105 |
Number of clamping points | 4 |
Number of levels | 2 |
End cover plate required | YES |
Testing | EN 60947-7-1 |
Dimensions [mm] (width / height / length) | 5 / 57,5 / 69,3 |
Diode - typ | 1N4007 |
Diode - max. current lF [A] | 1 (in pass-through direction) |
Diode - max. closing voltage [V DC] | 1000 |
Weight [g] / Packing [pcs] | 11,7 g (1 piece) / 25 pieces per pack |
Note | The most common use as a blocking (flyback) diode to eliminate voltage peaks, reverse currents during electronic control of relays and contactors, etc. |
Solid conductor [mm²] | 0,5 ÷ 4 |
Finely stranded conductor [mm²] | 0,5 ÷ 2,5 |
2 x Solid conductor, Finely stranded conductor [mm²] | 0,5 ÷ 1 |
Stripping length [mm] | 8 |
Max. cross-section of 1 x conductor with insulated sleeve | 2,5 / 10 |
Max. cross-section of double insulated sleeve [mm²] / length [mm] | 1,5 / 10 |