Multilevel terminal block EB 2,5 U2/5 LD 230V
Manufacturer Code: A921135
4,80 € without VAT 5,81 € with VAT
Multilevel terminal block EB 2,5 U2/5 LD 230V
| Rated cross-section [mm²] | 2,5 |
| Connection range [mm²] | 0,5 ÷ 4 |
| Rated current [A] | 24 (The current load at the EB 2.5 U2 terminal in the case of an applied connecting ridge is max. 20 A) |
| Short-time withstand current [A] | 300 |
| Rated voltage Ui [V] | 1000 AC / DC |
| Nominal operating voltage Ue [V] | 230 AC |
| Rated impulse withstand voltage U (Imp) [kV] | 8000 |
| Tightening torque [Nm] | 0,4 |
| Tools | PH 0 / 0,5 x 3 |
| Assembly method (on DIN rail) | TH 35 |
| IP code | 20 |
| Operating temperature [°C] | -40 ÷ +105 |
| Number of clamping points | 4 |
| Number of levels | 2 |
| End cover plate required | YES |
| Testing | EN 60947-7-1 |
| Dimensions [mm] (width / height / length) | 5 / 57,5 / 69,3 |
| LED color | red |
| LED min. voltage Vf [V] / max. voltage Vf [V] | 1,7 |
| LED max. voltage Vf [V] | 2,2 |
| LED max current lF [mA] | 2 |
| Resistor - resistance [kΩ] | 100 |
| Resistor - power loss [W] | 0,6 |
| Diode - typ | 1N4007 |
| Diode - max. current lF [A] | 1 (in pass-through direction) |
| Diode - max. closing voltage [V DC] | 1000 |
| Weight [g] / Packing [pcs] | 12.1 g (1 piece) / 25 pieces per pack |
| Note | Light signaling visualizing the operating states of electrical circuits with protection against polarity reversal. |
| Solid conductor [mm²] | 0,5 ÷ 4 |
| Finely stranded conductor [mm²] | 0,5 ÷ 2,5 |
| 2 x Solid conductor, Finely stranded conductor [mm²] | 0,5 ÷ 1 |
| Stripping length [mm] | 9 |
| Max. cross-section of 1 x conductor with insulated sleeve | 2,5 / 10 |
| Max. cross-section of double insulated sleeve [mm²] / length [mm] | 1,5 / 10 |