RSE SZ 24V with DC / DC convertor with transformer

Manufacturer Code: A128222

35,87 € without VAT 43,40 € with VAT

Rated cross-section [mm²]	2,5
Rated impulse withstand voltage Uimp [V DC]	1500
Conductor cross-section [mm²]	0,5 ÷ 4
Stripping length [mm]	6,5
Tightening torque [Nm]	0,4
Assembly method (on DIN rail)	TH 35
Pollution degree	2
IP code	20
Operating temperature [°C]	-20 ÷ +55
Number of clamping points per level	4 / 2
End cover plate required	NO
Testing	ČSN EN 60947-7-1
Dimensions [mm] (width / height / length)	5,2 / 61,1 / 62,2
Weight [g] / Packing [pcs]	18 / 1
Recyklační příspěvek součástí ceny výrobku [Kč]	0,018
Output voltage reproducibility [%]	Max. 0,5
Output voltage stability depending on load change [%]	(I out = 0 ÷ 100%, U in = 24 V)Min. 0,2 │Max. 0,3
Output voltage stability depending on input voltage change [%]	(I out = 0, ∆U in = -20 ÷ 25%)Min. 0,1 │Max. 0,2
Isolation voltage (DC) I out = 0 mA [V AC]	Rated 2200 │ Min. 1500
Isolation voltage (DC) I out = 0 mA [V AC]	Rated 21
Short-circuit resistance U in = 24 V [s]	Rated 30 │ Min. 10
Permissible power loss [mW] ambient temperature 0÷35 °C	Max. 500
Permissible power loss [mW] ambient temperature 75 °C	Max. 300
Input voltage [V]	24
Output voltage [V]	24
Output current [mA]	30

Products in the same category: RSE SZ