RSE KT DC2A with 24 V solid state relay
Manufacturer Code: A128214
22,45 € without VAT 27,17 € with VAT
RSE KT DC2A with 24 V solid state relay
| Rated cross-section [mm²] | 2,5 |
| Rated impulse withstand voltage Uimp [V DC] | 1500 |
| Conductor cross-section [mm²] | 0,5 ÷ 4 |
| Stripping length [mm] | 6,5 |
| Tightening torque [Nm] | 0,4 |
| Tools | Screwdriver PH 0 |
| Assembly method (on DIN rail) | TH 35 |
| Pollution degree | 2 |
| IP code | 20 |
| Operating temperature [°C] | -20 ÷ +55 |
| Number of clamping points per level | 4 / 2 |
| End cover plate required | NO |
| Testing | ČSN EN 60947-7-1 |
| Dimensions [mm] (width / height / length) | 5,2 / 61,1 / 62,2 |
| Weight [g] / Packing [pcs] | 18 / 1 |
| Recyklační příspěvek součástí ceny výrobku [Kč] | 0,018 |
| Maximum switching voltage [V AC/DC] | 30 [V] DC |
| Maximum switching current [A] | 3 |
| Control voltage on [V] | 3 ÷ 30 |
| Control voltage open [V] | -30 ÷ 1 |
| Control current [mA] | to 4 |
| Insulation strength input / output [V] (at 60 s) DC | 1500 |
| Insulation resistance input / output [GΩ] (at 1000V DC) | 1 |
| Current through an anti-parallel diode [A] | 1 |
| Switching speed | to 15 [μs] |
| Lifetime - number of switches (at: I out = I max/4) | 1 000 000 000 |
| Operating temperature range (at: I out = 0 I max) [°C] | -40 ÷ +75 |
| Switching resistance [mΩ] | to 30 |
| Power loss [mW] / Peak current [<1ms] [A] | 150 / 15 |