RSE GO U10V with a galvanically separated converter
Manufacturer Code: A129001
41,64 € without VAT 50,39 € with VAT
RSE GO U10V with a galvanically separated converter
| Rated cross-section [mm²] | 2,5 |
| Rated impulse withstand voltage Uimp [V DC] | 1500 |
| Conductor cross-section [mm²] | 0,5 ÷ 4 |
| Stripping length [mm] | 6,5 |
| Tightening torque [Nm] | 0,4 |
| Tools | Šroubovák PH 0 |
| Assembly method (on DIN rail) | TH 35 |
| Pollution degree | 2 |
| IP code | 20 |
| Operating temperature [°C] | -20 ÷ +55 |
| Number of clamping points per level | 4 / 2 |
| End cover plate required | NE |
| Testing | ČSN EN 60947-7-1 |
| Dimensions [mm] (width / height / length) | 5,2 / 61,1 / 62,2 |
| Weight [g] / Packing [pcs] | 18 / 1 |
| Input current (I in - at U in = 10 V and I out = 0 A) [mA] | Rozsah 0,8 ÷ 1,5 │ Jmen. 1,1 |
| Input voltage [V DC] | Rozsah 0 ÷ 10,2 |
| Input resistance (at I out = 0 A) [kΩ] | Rozsah 7 ÷ 11 │Jmen. 8 |
| Output voltage [V DC] | Rozsah 0 ÷ 10 |
| Output resistance [Ω] | Rozsah 40 ÷ 100 │Jmen. 50 |
| Voltage offset (at I out = 0 A) [mV] | Rozsah 170 ÷ 240 │ Jmen. 200 |
| Conversion accuracy [%] | Jmen. 2 |
| Insulation strength [V] | Jmen. 1500 |