RSE D R1A with protective and separation diode
Manufacturer Code: A128001
4,47 € without VAT 5,41 € with VAT
RSE D R1A with protective and separation diode
| Rated cross-section [mm²] | 2,5 |
| Rated impulse withstand voltage Uimp [V DC] | 1 500 |
| Conductor cross-section [mm²] | 0,5 ÷ 4 |
| Minimální délka odizolování [mm] | 6,5 |
| Tightening torque [Nm] | 0,4 |
| Tools | Screwdriver PH 0 |
| Assembly method (on DIN rail) | TH 35 |
| Pollution degree | 2 |
| IP code | 20 |
| Operating temperature [°C] | -20 ÷ +75 |
| Number of clamping points per level | 2 |
| Number of levels | 1 |
| End cover plate required | NO |
| Testing | ČSN EN60947-7-1 |
| Dimensions [mm] (width / height / length) | 5 / 40,5 / 41,5 |
| Weight [g] | 5 / 40,5 / 41,5 |
| Packing [pcs] | 1 |
| Diode type | Silicon |
| Max. repetitive peak voltage [V] | 400 |
| Max. rms voltage value [V] | 280 |
| Max. DC closing voltage [V] | 400 |
| Average throughput current [A] | 1 |
| Max. peak throughput current 10ms [A] | 30 |
| Max. loss in pass direction [V] | 1,1 |
| Max. closing current [μA] | 5 |
| Max. recovery time [μs] | 2,5 |
| Typical transient capacity | 15 [μF] |