RSE 4D R1A with rectifying bridge
Manufacturer Code: A128201
8,45 € without VAT 10,22 € with VAT
RSE 4D R1A with rectifying bridge
| Rated cross-section [mm²] | 2,5 |
| Rated impulse withstand voltage Uimp [V DC] | 1500 |
| Conductor cross-section [mm²] | 0,5 ÷ 4 |
| Minimální délka odizolování [mm] | 6,5 |
| Tightening torque [Nm] | 0,4 |
| Tools | Screwdriver PH 0 |
| Assembly method (on DIN rail) | TH 35 |
| Pollution degree | 2 |
| IP code | 20 |
| Operating temperature [°C] | -20 ÷ +75 |
| Number of clamping points per level | 4 |
| Number of levels | 2 |
| End cover plate required | NO |
| Testing | ČSN EN 60947-7-1 |
| Dimensions [mm] (width / height / length) | 5,2 / 61,1 / 62,2 |
| Weight [g] | 18 |
| Packing [pcs] | 1 |
| Recyklační příspěvek součástí ceny výrobku [Kč] | 0,018 |
| Diode type | Silicon |
| Max. repetitive peak voltage [V] | 400 |
| Max. rms voltage value [V] | 280 |
| Max. DC closing voltage [V] | 400 |
| Average throughput current [A] | 1 |
| Max. peak throughput current 10ms [A] | 30 |
| Max. loss in pass direction [V] | 2,2 |
| Max. closing current [μA] | 5 |
| Max. recovery time [μs] | 2,5 |
| Typical transient capacity | 15 [μF] |