Fuse terminal block RSP A 4
Manufacturer Code: A631140
3,10 € without VAT 3,75 € with VAT
Fuse terminal block RSP A 4
| Rated cross-section [mm²] | 4 |
| Rated current [A] | 12,5 |
| Short-time withstand current [A] | 1500 |
| Rated voltage Ui [V] | 500 |
| Rated impulse withstand voltage Uimp [kV] | 4 |
| Rated voltage or operating voltage range [V] | 500 |
| Tightening torque [Nm] | 0,5 |
| Tools | Screwdriver PH 0 |
| Assembly method (on DIN rail) | TH 15, TH 35, G 32 |
| Pollution degree | 2 |
| IP code | 20 / 10 * |
| Operating temperature [°C] | -40 - +55 |
| Number of clamping points per level | 2 |
| End cover plate required | NO |
| Maximum scattered power Pvk [W] | 2 |
| Size of fuse-link | F, T average 6,3 x 32 |
| Testing | ČSN EN 60947-7-3 |
| Dimensions [mm] (width / height / length) | 10,5 / 46 / 68,5 |
| Weight [g] | 21 |
| Packing [pcs] | 10 |
| Note | * The protection class of the fuse terminals is IP 20. In case of open fuse holder, the protection is IP 10. |
| Solid conductor [mm²] | 0,5 - 6 |
| Stranded conductor [mm²] | 0,5 - 4 |
| Finely stranded conductor [mm²] | 0,5 - 4 |
| 2 x Solid conductor, stranded conductor, finely stranded [mm²] | 0,5 - 1,5 |
| 3 x Solid conductor, stranded conductor, fi nely stranded [mm²] | 0,5 - 1 |
| Maximum conductor connection cross-section, fi nely stranded with wire-end ferrules with plastic collar [mm²] | 4 |
| Stripping length [mm] | 9,5 |
| Maximum outer diameter of the ferrule [mm] | 3,5 |
| Clamping screw | M3 |
| Insulating body | Polyamide (PA), inflammability V0, halogen-free |
| Electric conductive part | Brass (galvanic surfaced Sn) |
| Fixing part | Steel (galvanic surfaced) |